Hot Water Cylinder Replacement Auckland — Fixed Pricing, Installed Same Day

Hot water cylinder replacement starts from $2,100+GST fully installed for a Rinnai Infinity A26 gas continuous flow swap. Electric mains pressure cylinders like the Rheem 180L start from $2,957+GST installed. Heat pump systems start from $7,600+GST for the Rheem Ambipower 280E and $8,450+GST for the Rheem HDC270 Ambiheat. All prices include removal of old cylinder, new unit, installation, testing and certification.

We supply and install Rheem, Thermann, and Rinnai hot water systems. These are New Zealand's most trusted hot water brands, backed by manufacturer warranties of up to 10 years on the cylinder.

Our fixed prices include the new hot water cylinder or unit, removal and disposal of your old system, installation to existing plumbing in the same location, valve pack and seismic restraints, safe tray (code requirement), testing and certification. Electrical or building work is additional if required.

A standard like-for-like cylinder swap typically takes 2 to 5 hours. Upgrades involving relocation, new pipework, or heat pump installation can take a full day. We drain the old cylinder, remove it, install the new one, connect all pipework and electrical, test thoroughly, and restore hot water supply the same day — meaning you have hot water again by the evening.

Gas continuous flow systems like the Rinnai Infinity provide unlimited hot water on demand and are more energy efficient for many households. However, switching from electric to gas requires gas pipework installation which adds to the cost. We can advise on the best option for your property and usage.

Yes, in most cases. We carry common cylinder models in stock and can often complete a same-day replacement — especially for like-for-like electric cylinder swaps. Call us in the morning and have hot water by evening.

The best system depends on household size, energy efficiency goals, available space, fuel availability, and budget. Electric cylinders are cheapest upfront. Gas continuous flow never runs out of hot water and is great for larger households. Heat pump cylinders are the most energy-efficient and cheapest to run long-term. Solar hot water works best for north-facing roofs.

Yes — provided your property has a gas connection or room for LPG cylinders. The upgrade involves removing the old electric cylinder and installing a gas continuous flow system or gas cylinder, running new gas pipework, and getting gas compliance certification. We handle the full process including coordination with gas network providers.

Yes. Modern heat pump hot water cylinders work efficiently down to about 5°C ambient temperature. Auckland rarely experiences temperatures that affect performance. In colder areas, split-system heat pumps or hybrid systems are used to maintain efficiency through winter.

A general guide: 1-2 people: 135 to 180 litres. 3-4 people: 180 to 250 litres. 5-6 people: 250 to 300 litres. 7+ people: 300+ litres or continuous flow. Factors affecting size include shower length, bath use, dishwasher/washing machine usage, and peak-time demand. We help size correctly based on actual household needs.

No. Under New Zealand law, hot water cylinder installation must be carried out by a registered plumber. Incorrect installation creates serious safety risks including scalding, cylinder explosion, and water damage. It also voids your insurance and the manufacturer's warranty. Always use a PGDB-registered plumber.

Yes. Most new hot water cylinders come with a 7 to 10 year manufacturer's warranty on the tank, and 1 to 3 years on components. Our installation work is covered by a 5-year workmanship warranty. We register all warranties on your behalf and provide full documentation.

Typical Auckland households save $600 to $1000 per year on power bills by switching from electric to heat pump hot water. That's 60 to 75% less electricity for the same amount of hot water. Over 15 years of ownership, the cumulative savings often exceed the entire upfront cost of the system.

The main brands we install in Auckland are Rheem, Rinnai, Bosch, Ecosprings (heat pump), and Paloma. Rheem and Rinnai are reliable, widely serviced, and have strong warranties. Ecosprings is our preferred heat pump brand for energy efficiency. We recommend based on your specific needs rather than pushing one brand.

Yes. Replacement is often the best time to relocate a cylinder, especially if moving it outside frees up internal space or improves heat pump airflow. Relocation involves new pipework runs, potentially new electrical, and consideration of access for future servicing. We quote relocation as part of the full replacement job.